Information About Design Modifications

80.1, 82.1, 820

This service bulletin provides information on the need to avoid jamming the adapter when installing the lock coupling

1221Т.2, 1221.2, 1221В.2, 1221.3, 1221.4

This service bulletin provides information on the need to avoid jamming the adapter when installing the lock coupling

1025.2, 1025.3, 1025.4

This service bulletin provides information on the need to avoid jamming the adapter when installing the lock coupling

1822.3, 1822В.3, 2022.3, 2022В.3

Procedure for performing operation No. 59 “Change of oil in HLL tank” has been verified due to the need to clean the suction bell filter introduced into the design of the HLL.

3522

This operation bulletin provides details on corrections to BELARUS catalogue

3525

This operation bulletin provides details on corrections to BELARUS catalogue

3522.5

This operation bulletin provides details on corrections to BELARUS catalogue

920, 952, 920.2, 952.2, 920.3, 952.3

This operation bulletin provides information on the need to avoid jamming of the adapter when installing the lock-up clutch

3522, 3525 Caterpillar, Cummins, Deutz.

This service bulletin provides up-to-date information on servicing the air cleaner

1221, 1221В, 1221.2, 1221В.2, 1221.3, 1221В.3

This operation bulletin contains the following details:
- Group of Diesel engine mechanisms is added
- Subgroup of Engine assembly is added
- Pages 11a and 11b are added

952.7 Caterpillar

This operational bulletin contains the following information about the electronic engine fan control system introduced into the tractor design:
- the location on the CECS of a light annunciator for a malfunction in the electron-ic engine fan control system;
- diagnostics of malfunctions in the electronic engine fan control system, trouble-shooting methods;
- electrical diagram for connecting the electronic engine fan control system to the on-board circuit of the tractor.

923.7 Caterpillar

This operational bulletin contains the following information about the electronic engine fan control system introduced into the tractor design:
- the location on the CECS of a light annunciator for a malfunction in the electron-ic engine fan control system;
- diagnostics of malfunctions in the electronic engine fan control system, trouble-shooting methods;
- electrical diagram for connecting the electronic engine fan control system to the on-board circuit of the tractor.

3522

This operation bulletin introduces an additional maintenance operation to check and clean the wheel reduction gear units in the area where the double joints are installed.

3522, 3525 with CATERPILLAR and Cummins engines

This operational bulletin brings to the attention of customers information about the need to use special transmission-hydraulic oils when operating energy-saturated tractors with heavily loaded power transmissions.

3022.2, 3022В

This operational bulletin brings to the attention of customers information about the need to use special transmission-hydraulic oils when operating energy-saturated tractors with heavily loaded power transmissions.

3522

This bulletin contains additional information on the construction of service brakes.

3522.5

This bulletin contains additional information on the construction of service brakes.

3022DZ.1

This service bulletin contains information on the following changes in electrical equipment and instruments of tractor BELARUS-3022DZ.1»:
- a dashboard is shown with an instrument board installed instead of an instrument cluster, an integrated indicator and a block of pilot lamps;
- information is provided on the new relays and fuses assembly, switching unit in-stalled instead of several fuse blocks;
- a new algorithm for the operation and diagnostics of heating plugs is presented;
- information is provided about the battery box with a sealed compartment, the rules for installing and adjusting the FPTO sensor;
- a modified diagram of the electrical connections of the electrical equipment of the tractor is presented.

3022DZ.1

This bulletin contains information concerning updating tractor “BELARUS” catalogue due to introduction of the 3522C-2401100 plate with improved reliability of the tractor range change control system, which excludes the remote control cables failures of 3 and 4 ranges and the strengthened shaft 3522C-1701306, and due to introduction of the high efficiency pump, and adjusting washers according to DIN 988.

3522

This bulletin contains information concerning updating tractor “BELARUS” catalogue due to introduction of the 3522C-2401100 plate with improved reliability of the tractor range change control system, which excludes the remote control cables failures of 3 and 4 ranges and the strengthened shaft 3522C-1701306, and due to introduction of the high efficiency pump, and adjusting washers according to DIN 988.

3522С

This bulletin contains information concerning updating tractor “BELARUS” catalogue due to introduction of the 3522C-2401100 plate with improved reliability of the tractor range change control system, which excludes the remote control cables failures of 3 and 4 ranges and the strengthened shaft 3522C-1701306, and due to introduction of the high efficiency pump, and adjusting washers according to DIN 988.

82.3

This operation bulletin contains information regarding the need for check and adjustment of muffler and exhaust pipe position, if during repair or maintenance exhaust system of the BELARUS-82.3 tractor was disassembled/ assembled. Procedure for check and adjustment of muffler and exhaust pipe position is also presented.

3522

This bulletin contains the following information:
- in the transmission hydraulic system 3522-4637010 the oil intake 3522-4637050 has been changed.

3022.2/3022B

This bulletin contains the following information:
- in the transmission hydraulic system 3522-4637010 the oil intake 3522-4637050 has been changed.

3522 with engines Caterpillar

This bulletin contains the following information:
- in the transmission hydraulic system 3522-4637010 the oil intake 3522-4637050 has been changed.

3522/3525 CATERPILLAR and Cummins

This service bulletin contains updated information on the air cleaner mainte-nance. In this connection, amendments were made to subsections 1.3 “Tractor compo-sition”, 2.6 “Pilot lamps unit”, 3.1 “Engine and its systems”, 6.3 “Maintenance procedure “, 6.4.4 “Maintenance services in every 500 hours of operation”, 6.4.8 “General mainte-nance services” of the respective Operation manuals.

1221Т.2, 1221.2, 1221В.2, 1221.3, 1221.4

This operation bulletin introduces a note for operation 74 “Cleaning of dry-friction pressure plates of service brakes”.

1025.2, 1025.3, 1025.4

This operation bulletin introduces a note for operation 62 “Cleaning of dry-friction pressure plates of service brakes”.

510, 512, 520

This catalogue contains the following information:- it provides a structure of the hydrostatic steering F80-3400010-B with a dosing pump on the hydraulic booster (F80- 3400015-B), a hydraulic cylinder in the linkage and a front non-driving axle.

3522, 3525 with engines CATERPILLAR and Cummins

This operation bulletin contains updated information on the maintenance of the air cleaner. In this regard, subsections 2.6 "Pilot lamps unit", 6.3 "Maintenance procedure", 6.4.5. "Maintenance service in every 1000 hours of operation", 6.4.8 "General mainte- nance services" of these manuals have been modified.

82.3

This operation bulletin contains information on the changes in the power transmitted by the shaft end 1c/1/2 and in the maximum permissible torque on the PTO shaft ends 1c/1/2 of the BELARUS-82.3 tractor.

80.1, 82.1, 820

This operation bulletin contains updated information on the adjustment of torque transfer in the intermediate support. Therefore, clause 3.10.3.5 “Adjustment of the FDA cardan drive” and subsection 6.3 “Technical maintenance procedure”, 6.4.4 “Technical maintenance in every 500 hours of operation” of the present manual were changed.

3022DZ.1

In this operation bulletin, customers are informed about the need to use special transmission-hydraulic oils when operating energy-saturated tractors with high-loaded power transmissions.

1523, 1523В, 1523.3, 1523В.3

This operation bulletin contains the following information: - interval of maintenance operation No33 “Changing the filter element in the oil tank of the hydraulic system” and No40 “Changing the oil in the RHL hydraulic system oil tank” has been changed (from Maintenance-2 for Maintenance-3); - procedure of operation No. 40 "Changing the oil in the RHL hydraulic system oil tank" has been specified due to the need to clean the intake filter introduced into the HLL design.

3522

This operation bulletin contains information on adjustment of the BELARUS tractor catalog in connection with the introduction of the 50-1310158- B retracting spring on the P2607 clutch slave cylinder, with the replacement of the 2822-1602100-B cock with the 3022-1602100 cock, with the introduction of the S73067386 master cylinder from an alternative supplier into the clutch control, with the replacement of the 3522-1602070 pipeline with Ø8х1 952-3407100-04 high-pressure hose.

3022.2, 3022В

This operation bulletin contains updated information on the description and maintenance of the engine air purification system.

3522 with the “DEUTZ” engine

This operation bulletin contains updated information on the description and maintenance of the engine air purification system.

3522.5 with “DEUTZ” engine

This operation bulletin contains updated information on the description and maintenance of the engine air purification system.

1025, 1025.2, 1025.3, 1025.4, 1025.5, 1220.1, 1220.3, 1220.4, 1220.5, 1221.2, 1221.3, 1221.4, 1221.5, 1221, 1221В, 1221В.2, 1221В.3, 1222, 1222В, 1523, 1523.3, 1523.4, 1523.5, 1523.6, 1523В, 2022, 2022.3, 2022.4, 2022.5, 2022В, 2022В.3, 2122.3, 2122

This catalogue contains the following information: - design of the 80-1716010 mesh filter with various filter cartridges is introduced.

3022DZ.1

This service bulletin contains revised information on the description and maintenance of the engine air cleaning system.

900, 900.3, 920, 920.2, 920.3, 950, 950.3, 952, 952.2, 952.3

This operation bulletin contains information about operating tractors “BELARUS” in complete set with reverse-reduction gear and reduction or increasing synchro gearboxes (com-bined reduction gearbox), which relate to the order of operating controls use.

3522 with engines Caterpillar and Cummins

This operation bulletin contains the following information:
- the modified design of the transmission hydraulic system and duplex filter is presented;
- technical maintenance operations of the duplex filter are reedited;
- the malfunctions of the transmission hydraulic system are reedited.

3022DZ.1

This operation bulletin contains detailed technical description for performance of maintenance operation “Lubricating of FDA pivot axes’ bearings”

900.3, 920, 920.2, 920.3, 952, 952.2, 952.3

This operation bulletin contains information on changing the operation rules of tractors regarding the order of tractor engine start and stop, connected with the structure change of the engine start lock mechanism of the synchromesh gearbox with two-lever control.

3522 with engine Deutz

This operation manual contains information on the sequence of adjusting band brakes of front PTO in subsection 6.4.4 “Technical maintenance every 500 hours”.

3525 with engines Caterpillar и Cummins.

In this operation bulletin, customers are informed about the need to use special transmis- sion-hydraulic oils when operating energy-saturated tractors with high-loaded power transmis- sions.

3022DZ.1

In this operation bulletin the consumers are informed about the necessity to use special transmission-hydraulic oils when operating energy-saturated tractors with high loaded power transmissions.

1025.2, 1025.3, 1025.4

This operation bulletin contains the information about change of technical maintenance  timing procedure “Cleaning of the pressure disks of the dry friction service brakes”.

1025, 1025.2, 1025.3

This operation bulletin contains the information about introduction of the operation “Cleaning of the pressure disks of the dry friction service brakes” its frequency and used lubrication in section “Scheduled maintenance”.

1221.2, 1221В.2, 1221.3

This operation bulletin contains the information about introduction of operation Cleaning of the pressure disks of the dry friction brakes”, its frequency and used lubricant in section “Scheduled maintenance”.

1221Т.2, 1221.2, 1221В.2, 1221.3, 1221.4

This operation bulletin contains the information about change of technical maintenance operation frequency “Cleaning of the pressure disks of the dry friction service brakes”.

82.1

This operation manual introduces additional operation of technical maintenance for cleaning and greasing of a tube of a pivot of bevel wheel gear group.

920, 952

This operation manual introduces additional operation of technical maintenance for cleaning and greasing of a tube of a pivot of bevel wheel gear group.

892

This operation manual introduces additional operation of technical maintenance for cleaning and greasing of a tube of a pivot of bevel wheel gear group.

3022.2, 3022V

This operation bulletin contains information on structural changes to the hydraulic lift linkage system of BELARUS-3022.2/3022V tractors in terms of changes related to the housing for the clogging sensor of Hydraulic lift linkage pump filter, safety valve of the cooling system, design of the tank, breathers of the front hydraulic cylinders.

3022DZ.1

This operation bulletin contains information on structural changes to the hydraulic lift linkage system of BELARUS-3022.2/3022V tractors in terms of changes related to the housing for the clogging sensor of Hydraulic lift linkage pump filter, safety valve of the cooling system, design of the tank, breathers of the front hydraulic cylinders.

3522, 3525 with engines Caterpillar and Cummins

This operation bulletin contains additional information on the rules for using the front PTO shaft on "BELARUS - 3522/3525" tractors with Caterpillar and Cummins engines.

3522 with engines Caterpillar

This catalogue contains the following information: - an updated design of the transmission hydraulics 3522-4637010, a twin filter 3525-1716010, a distributor 2522-4212010-V, a distributor 2822-1712010-V, a mesh fil- ter 80-1716010 and FPTO control 3522С-4219000 are introduced.

3522

This catalogue contains the following information: - an updated design of the transmission hydraulics 3522-4637010, a twin filter 3525-1716010, a distributor 2822- 1712010-B, a mesh filter 80-1716010, FPTO control 3522-4219000 and FPTO control 3522-4219010 are introduced.

3022.2, 3022B

This catalogue contains the following information: - an updated design of the transmission hydraulics 3022.2-4637010, a twin filter 3525-1716010, a distributor 2522- 4212010-V, a distributor 2822-1712010-B, a mesh filter 80-1716010, FPTO control 2822-4219000 and FPTO control 3022V-4219000 are introduced.

3022.2.DZ.1

This catalogue contains the following information: - an updated design of the transmission hydraulics 3022.2-4637010, a twin filter 3525-1716010, a distributor 2822- 1712010-B, a mesh filter 80-1716010 and FPTO control 2822-4219000 are introduced.

1523.5 with hydromechanical transmission

The following information has been supplemented in this catalogue: - a design of the transmission hydraulics 1525-4637005-B, a twin filter 3022- 1716010, a distributor 2025-1712010-A and FPTO control 1525-4219000 are introduced.

3522, 3525 with CATERPILLAR and CUMMINS engines

This operation bulletin contains the following information: - tire 600/65R34 has been introduced as an additional (for twinning) instead of the previously used tire 520/70R34 for the purpose of unification; - rates of permissible loads on tires 520/70R34 to choose the operating mode at various internal pressures have been excluded; - rates of permissible loads on tires 600/65R34 at a pressure of 80 kPa for operation in a twinned version have been supplemented.

1221.5

This operation bulletin contains the following information:
- change of operating oils for HLL hydraulic system;
- change of main operating oil grade name for HSC hydraulic system (Rosneft Gidrotec HLP 32, HLP 68 instead of ТНК Hydraulik HLP 32, HLP 68);
- change of oil change periodicity in HLL and HSC hydraulic systems.

1221.6

This operation bulletin contains the following information:
- change of operation oils for HLL hydraulic system;
- change of main operation oil grade name for HSC hydraulic system (Rosneft Gidrotec HLP 32, HLP 68 instead of ТНК Hydraulik HLP 32, HLP 68);
- change of oil change periodicity in HLL and HSC hydraulic systems.

1221.2, 1221В.2, 1221.3

This operation bulletin contains the following information:
- change of operating oils for HLL and HSC hydraulic systems;
- change of main operating oil grade name for HSC hydraulic system (Rosneft Gidrotec HLP 32, HLP 68 instead of ТНК Hydraulik HLP 32, HLP 68);
- change of oil change periodicity in the HLL and HSC hydraulic systems.

3522

This operation bulletin contains the following information – change of main oper-ating oil grade name for HLL hydraulic system and HSC hydraulic system (Rosneft Gidro-tecHLP 32, HLP 68 instead of ТНК Hydarulik HLP 32, HLP 68).

3522, 3525 (CATERPILLAR)

This operation bulletin contains information on peculiar features of engine CATERPILLAR C9 CPXL08.8ESK mounting on the tractors “BELARUS-3522/3525” during maintenance.

3022

In the present operation bulletin the information about the design of the service brakes is added.

80.1, 82.1, 820

The present operation bulletin contains the following information:
- parameters and characteristics of tractors “BELARUS-80.1/82.1/820” with engine D-243S2;
- the rules of air conditioner control, exploitation, technical maintenance and possible fail-ures;
- the rules of onboard tractor system control;
- names and grades of fuel and lubricants, used at the present time during operation and technical maintenance with indication of their quantity and change intervals.

1523Т.3, 1523Т1, 1523Т1.3

This operation bulletin contains detailed technical description of technical maintenance operation performance “Greasing of pivot axles bearings of FDA and pivot pin bearing of FDA”.

3522 (CUMMINS QSL 8.9)

In this operation bulletin the grades of oils and coolants used in engine CUM-MINS QSL 8.9 of tractor Б-3522 are specified.

1523, 1523В, 1523.3, 1523В.3

This operation bulletin contains the following information:
- possible variants of tires mounting and their load characteristics;
- method of selection of optimal inner tire pressure depending on operational conditions and load on tractors Б-1523, 1523B, 1523.3, 1523B.3 axles.

2122.3, 2122.4, 2122.6

This operation bulletin contains the following information:
- method of optimal inner tire pressure selection depending on the operational conditions and load on tractors Б-2122.3, 2122.4, 2122.6 axles;
- adjustment of inner pressure in tire 580/70R42 Бел-126М in accordance with the table of loads and pressures of tire manufacturer for tractor Б-1221.6.

1523.4

This operation bulletin contains detailed technical description of TM operation performance “Greasing of pivot axles bearings of FDA and pivot pin bearing of FDA”.

1523.5

This operation bulletin contains the following information:
- instead of technical maintenance operation “Greasing of pivot axles bearings of FDA” every 125 hours of tractor operation the operation “Greasing of pivot axles bearings of FDA and pivot pin bearing of FDA” every 250 hours of tractor operation shall be introduced;
- detailed technical description of TM operation “Greasing of pivot axles bearings of FDA and pivot pin bearing of FDA” is given.

1523.5 with HMT, 1523.6

This operation bulletin contains the following information:
- instead of technical maintenance operation “Greasing of pivot axles bearings of FDA” the operation “Greasing of pivot axles bearings of FDA and pivot pin bearing of FDA” shall be introduced;
- detailed technical description of TM operation  “Greasing of pivot axles bear-ings of FDA and pivot pin bearing of FDA” is given.

1523.6 with HMT

This operation bulletin contains detailed technical description of TM operation “Greasing of pivot axles bearings of FDA”.

1523, 1523В, 1523.3, 1523В.3

This operation bulletin contains the following information:
- instead of technical maintenance operation “Greasing of pivot axles bearings of FDA” every 125 hours of tractor operation the operation “Greasing of pivot axles bear-ings of FDA and pivot pin bearing of FDA” every 250 hours of tractor operation shall be introduced;  
- detailed technical description of TM operation “Greasing of pivot axles bearings of FDA and pivot pin bearing of FDA” is given.

3522 with Caterpillar/Cummins engines

In this operation bulletin changes in the technical maintenance procedure are provided, which are introduced to optimize time input and labor costs of TM.

3522 with Deutz engine

In this operation bulletin changes in the technical maintenance procedure are provided, which are introduced to optimize time input and labor costs of TM.

1523, 1523В, 1523.3, 1523В.3

In this operation bulletin changes in the technical maintenance procedure are provided, which are introduced to optimize time input and labor costs of TM.

1523Т.3, 1523Т1, 1523Т1.3

In this operation bulletin changes in the technical maintenance procedure are provided, which are introduced to optimize time input and labor costs of TM.

1523.4

In this operation bulletin changes in the technical maintenance procedure are provided, which are introduced to optimize time input and labor costs of TM.

1523.6

In this operation bulletin changes in the technical maintenance procedure are provided, which are introduced to optimize time input and labor costs of TM.

1523.6 with hydromechanical transmission

In this operation bulletin changes in the technical maintenance procedure are provided, which are introduced to optimize time input and labor costs of TM.

1523.5 with hydromechanical transmission

In this operation bulletin changes in the technical maintenance procedure are provided, which are introduced to optimize time input and labor costs of TM.

1523.5

In this operation bulletin changes in the technical maintenance procedure are provided, which are introduced to optimize time input and labor costs of TM.

920, 952

This operation bulletin introduces additional maintenance operation on greasing tube of pivot of bevel wheel gear group.

82.1

This operation bulletin introduces additional maintenance operation on greasing tube of pivot of bevel wheel gear group.

572, 892

This operation bulletin introduces additional maintenance operation on greasing tube of pivot of bevel wheel gear group.

3522.5

This operation bulletin contains information on correction of tractor “BELARUS” catalogue in connection with the substitution of bracket 3522-8112030 for 3522-8114030-Б.

3522

This operation bulletin contains information on correction of tractor “BELARUS” catalogue in connection with the substitution of bracket 3522-8112030 for 3522-8114030-Б.

80.1, 82.1, 820, 892, 892.2, 570, 572, 592.2

This service bulletin contains information on tractor towing.

920.5

This service bulletin contains information on emergency exits and emergency actions.

921, 921.2, 921.3, 921.4

This service bulletin contains information on tractor towing.

510, 510.1, 510.2, 511, 511.1, 512, 512.1, 512.2, 520, 520.1, 522, 570, 572, 592.2, 80.1, 820, 80Х, 80Х.1, 82.1, 892, 892.2, 900.3, 92, 92П, 920, 920.2, 920.3, 952, 952.2, 952.3, 100X

In the present operational bulletin information is given on correction of the tractor “BELARUS” catalogues in connection with implementation in the unit of the fuel tanks 70-1101005 and 920-1101500 of the integrated drainage fuel line with engine high-pressure fuel pump.

900, 900.2, 900.3, 920, 920.2, 920.3, 952, 952.2, 952.3, 1025, 1025.2, 1025.3, 1021.3

In the present operational bulletin information is given on correction of the tractor “BELARUS” catalogues in connection with implementation in the unit of the fuel tanks 920-1101500-01/-04 of the integrated drainage fuel line with engine high-pressure pump.

892, 892.2

In the present operational bulletin the following information is given:
- change of functional base oils for hydraulic system tank with hydraulic units HLL and HSC;
- change in periodicity of oil change in hydraulic system tank with hydraulic units HLL and HSC.

80.1, 82.1, 820

In the present operational bulletin the information is given
- change of functional oils for hydraulic lift linkage, hydrostatic steering control and hy-draulic power steering;
- change in the periodicity of oil change of hydraulic lift linkage, hydrostatic steering con-trol, and hydraulic power steering.

570, 572, 592.2

This service bulletin contains the following information:
- changed applicable basic oils for tank of hydraulic system with hydraulic units of hydraulic lift linkage and hydrostatic steering control;
- amended frequency of oils’ change in tank of hydraulic system with hydraulic units of HLL and HSC.

3522 with CATERPILLAR and CUMMINS engines

This operation bulletin contains information on the use of the front PTO.

1822.3, 1822В.3, 2022.3, 2022В.3

In this operation bulletin the information about the category of tractor cabin in accordance with EN 15695-1:2009 is provided

1523.5 with HMT

In this operation bulletin the following information is provided – change of grade name of the functional main oil for HLL hydraulic system and HSC hydraulic system (Rosneft GidrotecHLP 32, HLP 68 instead of  ТHK Hydraulik HLP 32, HLP 68)

1523.6 with HMT

In this operation bulletin the following information is provided – change of  oil grade name of the functional main oil for HLL hydraulic system and HSC hydraulic sys-tem (Rosneft GidrotecHLP 32, HLP 68 instead of  ТHК Hydraulik HLP 32, HLP 68)

1523.5

In this operation bulletin the following information is provided – changes of name grade of the functional main oil for HLL hydraulic system and HSC hydraulic sys-tem (Rosneft GidrotecHLP 32, HLP 68 instead of ТHК Hydraulik HLP 32, HLP 68)

1523.4, 1523.6

In this operation bulletin the following information is provided – change of grade name of the functional main oil for HLL hydraulic system and HSC hydraulic system (Rosneft GidrotecHLP 32, HLP 68 instead of  ТHК Hydraulik HLP 32, HLP 68)

2122.3, 2122.4, 2122.6

In this operation bulletin the following information is provided – change of  grade name of the functional main oil for  HLL hydraulic system and HSC hydraulic system  (Rosneft GidrotecHLP 32, HLP 68 instead of  ТHК Hydraulik HLP 32, HLP 68)

2022.6

In this operation bulletin the following information is provided – change of grade name of the functional main oil for HLL hydraulic system and HSC hydraulic system (Rosneft GidrotecHLP 32, HLP 68 instead of  ТHК Hydraulik HLP 32, HLP 68)

1822.3, 1822В.3, 2022.3, 2022В.3

In this operation bulletin the following information is provided – change of  the functional main oils for HLL and HSC hydraulic systems and change of grade name of the functional main oil for HLL hydraulic system and HSC hydraulic system (Rosneft GidrotecHLP 32, HLP 68 instead of  ТHК Hydraulik HLP 32, HLP 68)

2022.5

In this operation bulletin the following information is provided – change of  the functional main oils for HLL and HSC  hydraulic systems and change of grade name of the functional main oil for  HLL hydraulic system and HSC hydraulic system  (Rosneft GidrotecHLP 32, HLP 68 instead of  ТHК Hydarulik HLP 32, HLP 68)

1523, 1523В, 1523.3, 1523В.3

In this operation bulletin the following information is provided – change of the functional main and duplicate oils for HLL and HSC hydraulic systems and change of grade name of the functional main oil for HLL hydraulic system and HSC hydraulic sys-tem (Rosneft GidrotecHLP 32, HLP 68 instead of ТNК Hydraulik HLP 32, HLP 68)

920, 920.2, 920.3, 952, 952.2, 952.3

In this operation bulletin the information about front driving axle engagement control is provided.

1221.6, 1221.4, 1221, 1221.В, 1221.2, 1221В.2, 1221.3, 1221В.3, 1221.4, 1523, 1523В, 1523.3, 1523.4, 1523.5, 1523.5

This operation bulletin contains information on corrections of BELARUS tractor catalogues due to changes in part names.

1025, 1025.2, 1025.3, 1025.4, 1025.5, 1025.6

This operation bulletin contains information on the correction of tractor “BELARUS” catalogues due to the changes in the design of rear PTO shaft 1025-4202010-Б (1025-42020-B rear PTO “Reducing unit”), introduction of disk springs, new design of the piston, it became possible to rotate rear PTO shank end to an angle of 60º.

1221.6

This operation bulletin contains information on the correction of tractor “BELARUS” catalogues due to the changes in the design of rear PTO shaft 1025-4202010-Б (1025-42020-B rear PTO “Reducing unit”), introduction of disk springs, new design of the piston, it became possible to rotate rear PTO shank end to an angle of 60º.

1221.5

This operation bulletin contains information on the correction of tractor “BELARUS” catalogues due to the changes in the design of rear PTO shaft 1025-4202010-Б (1025-42020-B rear PTO “Reducing unit”), introduction of disk springs, new design of the piston, it became possible to rotate rear PTO shank end to an angle of 60º.

1221.4

This operation bulletin contains information on the correction of tractor “BELARUS” catalogues due to the changes in the design of rear PTO shaft 1025-4202010-Б (1025-42020-B rear PTO “Reducing unit”), introduction of disk springs, new design of the piston, it became possible to rotate rear PTO shank end to an angle of 60º.

920.6, 952.6

This operation bulletin contains information on the correction of tractor “BELARUS” catalogues due to the changes in the design of rear PTO shaft 1025-4202010-Б (1025-42020-B rear PTO “Reducing unit”), introduction of disk springs, new design of the piston, it became possible to rotate rear PTO shank end to an angle of 60º.

1220.1, 1220.3, 1220.4, 1220.5

This operation bulletin contains information on the correction of tractor “BELARUS” catalogues due to the changes in the design of rear PTO shaft 1025-4202010-Б (1025-42020-B rear PTO “Reducing unit”), introduction of disk springs, new design of the piston, it became possible to rotate rear PTO shank end to an angle of 60º.

1221, 1221В, 1221.2, 1221В.2, 1221.3, 1221В.3

This operation bulletin contains information on the correction of tractor “BELARUS” catalogues due to the changes in the design of rear PTO shaft 1025-4202010-Б (1025-42020-B rear PTO “Reducing unit”), introduction of disk springs, new design of the piston, it became possible to rotate rear PTO shank end to an angle of 60º.

510, 510.1, 512, 512.2, 520, 522

This operation bulletin contains information on the correction of tractor “BELARUS” catalogue due to the change of the pipe 50-4607110 for 50-4607110-Б (BK500-227), introduction of the fitting pipe 70-4607116-A (BK 900-927)

3222, 3522

This service bulletin provides updates of information on the rear wheel twinning procedure with use of spacers and additional information on air pressure management and inflation of tyres of twinned rear wheels.

3522 CATERPILLAR C9 CPXL08.8ESK code 2033

This service bulletin provides updates of information on the rear wheel twinning procedure with use of spacers and additional information on air pressure management and inflation of tyres of twinned rear wheels.

923.5

This operation bulletin contains additional information on the reasons for power battery low charge due to incorrect commutation of wires, and ways of its elimination.

1221.5

This information bulletin contains the following information:
- additional details are given about the reasons for low battery level due to the wrong commutation of the wires, as well as troubleshooting methods;  
- details are given on the differences between "BELARUS-1221.5" tractor with SCR system by "BOSCH" company (Germany) and "BELARUS-1221.5" tractor with SCR system by "ROSSKATavto" company (Russia).

1025.5, 1220.5

This information bulletin contains the following information:
- additional details are given about the reasons for low battery level due to the wrong commutation of the wires, as well as troubleshooting methods;  
- details are given on the differences between "BELARUS-1025.5/1220.5" tractors with SCR system by "BOSCH" company (Germany) and "BELARUS-1025.5/1220.5" tractors with SCR system by "ROSSKATavto" company (Russia).

1021.5

This information bulletin contains additional details about the reasons for low battery level due to the wrong commutation of the wires, as well as troubleshooting methods.

922.5

This information bulletin contains additional details about the reasons for low battery level due to the wrong commutation of the wires, as well as troubleshooting methods.

952.5

This information bulletin contains the following information:
- additional details are given about the reasons for low battery level due to the wrong commutation of the wires, as well as troubleshooting methods;  
- details are given on the differences between "BELARUS-952.5" tractor with SCR system by "BOSCH" company (Germany) and "BELARUS-952.5" tractor with SCR system by "ROSSKATavto" company (Russia).

3522 with Caterpillar engine

This annotation bulletin contains additional details on hydraulic lift linkage EHS1 with CAN flow restriction panel, which can be installed on “BELARUS-3522” tractors instead of the flow restriction unit.

80Х, 80Х.1, 100Х

This information bulletin provides information on the conformity of "BELARUS-80X/80X.1/100X" tractor cab to the requirements of EN 15695-1:2011, on the control of the air conditioning system, the maintenance procedure for the ventilation and heating system (air conditioning) of the cabin, with the indication of operations and their frequency, on possible malfunctions of the air ventilation system, cabin heating, air conditioning system and instructions for troubleshooting.

3022ДЦ.1

This service bulletin contains additional information on types of faults (defects) of agricultural tyres, their probable causes and methods of troubleshooting.

3522 (CATERPILLAR C9 CPXL08.8ESK code 2033)

This service bulletin contains updated information on names and identifications of brands of oil filled into the front PTO reduction gear (planetary).

3222, 3522, 3522.5

This operation bulletin contains additional information on servicing air conditioner.

1221.4

This service bulletin contains the following information:
- speed sensor installation and adjustment rules;
- putting the rear PTO operation indication system with a RPM sensor into service.
The following note shall be added to Abbreviations and Designations point in Introduction section:
RPTO – rear power take-off,
FPTO – front power take-off.

3022 DTS.1

This bulletin contains information on the changes in the transmission control system actions in extreme conditions in case of engine overheating.

3522

This bulletin contains amended information regarding installation of compressor and air conditioner hoses due to the compressor replacement.

1523.5

This bulletin contains additional information on operation of drawbar hitches (DH) of BELARUS-1523.5 tractors:
- increase in the quantity of DH actuators used for coupling with all types of agri-cultural implements;
- basic parameters and coupling dimensions of additional DH actuators.

3022 DTS.1

This bulletin contains information on the changes in the transmission control system actions in extreme conditions in case of engine overheating.

3022.2

This operation bulletin contains information regarding changes in the transmission control system and regarding emergency actions in case of engine overheat.

3022.2, 3022В

This operation bulletin contains the maintenance order for “BELARUS-3022.2/3022B” tractors with names of operations and their periodicity.

570, 572, 592.2, 80.1, 80.3, 82.1, 82.3, 806, 820, 821, 821.2, 821.3, 826, 900.3, 900.4, 906, 92П, 920, 920.2, 920.3, 921, 921.2, 921.3, 921.4, 922.3, 922.4, 922.5, 923, 923.4, 923.4, 926, 952, 952.2, 952.3, 952.4, 952.5, 1021.3, 1021.5

This operation bulletin contains information on amendments to BELARUS tractor catalogues due to introduction of rear PTO 920-4202010 with a modified mechanism of band brake tightening.

510.1, 511, 512, 512.1, 512.2, 520, 522, 570, 572, 592.2, 80.1, 820, 80.3, 80Х, 80Х.1, 82.1, 82.3, 806, 826, 892, 892.2, 892.3, 900, 900.2, 900.3, 906, 926, 92, 92П, 920, 920.2, 920.3, 920.4, 950, 950.2, 950.3, 952, 952.2, 952.3, 952.4, 952.5, 100X

This operation bulletin contains information on amendments to BELARUS tractor catalogues due to introduction of rear PTO 90-4202010 with a modified mechanism of band brake tightening.

923.5

This operation bulletin contains information about changes in function of cutout fuses of engine electronic control system.

1523.5-17/210, 1523.6

This operation bulletin contains additional details on operation of drawbar hitch (DH) of BELARUS-1523.5-17/210 tractor (with hydromechanical transmission) and BELARUS-1523.6:
- concerning increase in the number of executive devices of drawbar hitch for coupling with various agricultural implements;
- basic parameters and coupling dimensions of additional executive devices of drawbar hitch.  

952.5, 922.5, 923.5, 1021.5, 1025.5, 1220.5, 1221.5, 1221.6

This service bulletin contains additional information on drawbar hitch DH-1М-01 (draw bar) characteristics resulting from the changes introduced in the drawbar hitch DH-1М-01 (draw bar) design.

920.4, 952.4, 1025.4, 1221.4

This service bulletin specifies the characteristics of TIER-3A engine electronic control system display.

80Х, 80Х.1, 100Х

This service bulletin contains information on BELARUS tractor operation manual amendment, associated with the introduction of rear PTO shaft 90-4202010 with modified band brake tightening mechanism.

90, 92

This service bulletin contains information on BELARUS tractor operation manual amend-ment associated with the introduction of rear PTO shaft 90-4202010 with modified band brake tightening mechanism.

80.1, 82.1, 820

This service bulletin contains information on BELARUS tractor operation manual amendment associated with the introduction of rear PTO shaft 90-4202010 with modified band brake tightening mechanism.

570, 572, 592.2

This service bulletin contains information on BELARUS tractor operation manual amendment, associated with the introduction of rear PTO shaft 90-4202010 with modified band brake tightening mechanism.

510, 512

This service bulletin contains information on BELARUS tractor operation manual amendment associated with the introduction of rear PTO shaft 90-4202010 with modified band brake tightening mechanism.

1021, 1021.3

This service bulletin contains information on BELARUS tractor operation manual amendment associated with the introduction of rear PTO shaft 90-4202010 with modified band brake tightening mechanism.

92П

This service bulletin contains information on BELARUS tractor operation manual amendment associated with the introduction of rear PTO shaft 90-4202010 with modified band brake tightening mechanism.

892, 892.2

This service bulletin contains information on BELARUS tractor operation manual amendment associated with the introduction of rear PTO shaft 90-4202010 with modified band brake tightening mechanism.

821, 821.2, 821.3, 921, 921.2, 921.3

This service bulletin contains information on BELARUS tractor operation manual amendment, associated with the introduction of rear PTO shaft 90-4202010 with modified band brake tightening mechanism.

900, 900.3, 920, 920.2, 920.3, 950, 950.3, 952, 952.2, 952.3

This service bulletin contains information on BELARUS tractor operation manual amendment associated with the introduction of rear PTO shaft 90-4202010 with modified band brake tightening mechanism.

1025, 1025.2, 1025.3, 1025.4, 1025.5, 1220.1, 1220.3 1220.4, 1220.5

This service bulletin contains information on BELARUS tractor catalogue amendments due to reduction gear 1025-1706000-В installation, screws М12-6gx35.88.019 GOST 11738-84 with a countersunk hexagon head installation, change of control link handle number.

1221, 1221.2, 1221.3, 1221В, 1221В.2, 1221В.3, 1221.4

This service bulletin contains information on BELARUS tractor catalogue amendments due to reduction gear 1025-1706000-В-01 installation, screws М12-6gx35.88.019 GOST 11738-84 with a countersunk hexagon head installa-tion, change of control link handle number.

1523, 1523В, 1523.3, 1523В.3, 1523.4, 1523.5, 1222, 1222B, 1222.3, 1222В.3

This service bulletin contains information on BELARUS tractor catalogue amendments due to reduction gear 1523-1706000 installation, lubrication and linkage system modification.

921, 921.2, 921.3, 921.4

This operation bulletin contains information on amendments to BELARUS tractor operation manuals due to introduction of the rear PTO 90-4202010 with a modified mechanism of band brake tightening.

900, 900.3, 920, 920.2, 920.3, 950, 950.3, 952, 952.2, 952.3

This operation bulletin contains amended data on parameters of draw hitch DH-1M-01 (draw bar) due to design changes.

1221.2, 1221В.2, 1221.3

This operation bulletin contains amended data on parameters of draw hitch DH-1M-01 (draw bar) due to design changes.

1025, 1025.2, 1025.3

This operation bulletin contains the following information:
  - amendments made to “Introduction” section;  
  - details are given about changes in tables describing function of fuses and relay installed in the dashboard;
  - sheets E2, E3 “Adjustment of speed sensor” shall be amended.

1021, 1021.3, 1021.4

This service bulletin contains amended information on the parameters of drawbar hitch DH-1М-01 (towing bar) due to the design changes introduced.

1523.5

Taking into account the implementation of facing 1520-8400005 and its alternative usage on tractors 1523.5, amendments were introduced into this assembly units and parts catalogue.

1523.4

Taking into account the implementation of facing 1520-8400005 and its alternative usage on tractors 1523.4, amendments were introduced into this assembly units and parts catalogue.

1523, 1523В, 1523.3

Taking into account the implementation of facing 1520-8400005 and its alternative usage on tractors 1523/1523В/1523.3, amendments were introduced into this assembly units and parts catalogue.

3022.2, 3022В

This Bulletin provides information on the modification of tractor BELARUS-3022.2/3022В hydraulic system, resulting from the replacement of integrated unit EHS with integrated unit EHS1, the pump with the volumetric displacement of 45 cc with the pump with the volumetric displacement of 63 cc, installation of new quick-lock couplings with leak col-lection со сбором утечек in the process of coupling (decoupling) and HLL cooling radiator.

3022ДЦ.1

This Bulletin provides information on the modification of tractor BELARUS-3022ДЦ.1 hydraulic system, resulting from the replacement of integrated unit EHS with integrated unit EHS1, the pump with the volumetric displacement of 45 cc with the pump with the volumetric displacement of 63 cc, installation of new quick-lock couplings with leak collection со сбо-ром утечек in the process of coupling (decoupling) and HLL cooling radiator.

1822.3, 2022.3

This operation bulletin contains additional data on the hydraulic drive of trailer brakes, which will be installed along with currently applicable single-line, double-line and combined pneumatic drive of trailer brakes against order.

1523, 1523В, 1523.3, 1523В.3

This operation bulletin contains additional data on the control of the pilot lamp for oil emergency temperature in HLL tank of BELARUS 1523/1523B/1523.3/1523B.3 tractors.

1221.5

1822.3, 1822В.3, 2022.3, 2022В.3

This operation bulletin contains information about changes in the electrical system of shifting between reduction gear passes “L” or “H” when the electrohydraulic distributor with two electromagnets controlling shifting between passes is installed instead of the electrohydraulic distributor with a single electromagnet.

2022.5

This operation bulletin contains information about changes in the electrical system of shifting between reduction gear passes “L” or “H” when the electrohydraulic distributor with two electromagnets controlling shifting between passes is installed instead of the electrohydraulic distributor with a single electromagnet.

3022B, 3022.2

This operation bulletin contains updated information regarding mounting of rear wheel hubs on the rear semi-axle of the tractor.

3522, 3522.5

This operation bulletin contains updated information regarding mounting of rear wheel hubs on the rear semi-axle of the tractor.

1822.3, 1822В.3, 2022.3, 2022В.3

This operation bulletin introduces an alternative variant of a rear tire

1822.3, 1822В.3, 2022.3, 2022В.3

This operation bulletin contains updated information regarding mounting of rear wheel hubs on the rear semi-axle of the tractor.

1523, 1523В, 1523.3, 1523В.3

This operation bulletin contains updated information regarding mounting of rear wheel hubs on the rear semi-axle of the tractor.

1523.6, 1523.5, 1523.5-17, 210

This operation bulletin contains updated information regarding mounting of rear wheel hubs on the rear semi-axle of the tractor.

2022.5

This operation bulletin contains updated information regarding mounting of rear wheel hubs on the rear semi-axle of the tractor.

3222, 3522

2022.6

This operation bulletin contains updated information regarding mounting of rear wheel hubs on the rear semi-axle of the tractor.

1221.5, 1220.5, 1021.5, 1221.6

This operation bulletin contains updated information regarding mounting of rear wheel hubs on the rear semi-axle of the tractor.

1221.2, 1221В.2, 1221.3, 1221.4

This operation bulletin contains updated information regarding mounting of rear wheel hubs on the rear axle shaft of the tractor.

2122.6

This operation bulletin contains information about maximum permitted torques on rear and front PTO shaft ends of “BELARUS-2122.6” tractor when coupled with agricultural implements and units. Power transferred by RPTO shaft end extension Type2 is amended.

922.5

This operation bulletin contains amended information regarding structure and listing of assembly units and parts for gearbox control of BELARUS-922.5 tractor.

952.5

This operation bulletin contains amended information regarding structure and listing of assembly units and parts for gearbox control of BELARUS-952.5 tractor.

1021.5

This operation bulletin contains amended information regarding structure and listing of assembly units and parts for gearbox control of BELARUS-1021.5 tractor.

920.4, 952.4

This operation bulletin contains amended information regarding structure and listing of assembly units and parts for gearbox control of BELARUS-920.4/952.4 tractor.

923.5

This operation bulletin contains amended information regarding structure and listing of assembly units and parts for gearbox control of BELARUS-923.5 tractor.

1021.3

This operation bulletin contains amended information regarding structure and listing of assembly units and parts for gearbox control of BELARUS-1021.3 tractor.

922.3, 922.4

This operation bulletin contains amended information regarding structure and listing of assembly units and parts for gearbox control of BELARUS-922.3/922.4 tractor.

570, 572, 592.2

This operation bulletin contains the following information:
- deletion of current backup types of oil for engine crankcase;
- updating names of current foreign types of oil for engine crankcase.

80.1, 82.1, 820

This operation bulletin contains the following information:
- deletion of current backup types of oil for engine crankcase;
- updating names of current foreign types of oil for engine crankcase.

2022.3, 2022В.3

This information bulletin contains information about changes in clutch control due to the introduction of fitting 1525-4637042-01 instead of bolt 240-1111103.

1021, 1021.3

This Bulletin provides information on changing operation rules of tractors "Belarus - 1021 / 1021.3" on the order of starting and stopping the diesel engine, related to changes in the design of the engine start-up locking mechanism for synchromesh gearbox with two-lever control.

1523, 1523В, 1523.3, 1523В.3

This service bulletin contains the following information:
- specifying names of engine crankcase main oils;
- engine crankcase double oil removal;
- specifying names of engine crankcase foreign oils.

1221.2, 1221В.2, 1221.3

This service bulletin contains the following information:
- specifying names of engine crankcase main oils;
- engine crankcase double oil removal;
- specifying names of engine crankcase foreign oils.

1822.3, 1822В.3, 2022.3, 2022В.3

This service bulletin contains the following information:
- specifying names of engine crankcase main oils;
- engine crankcase double oil removal;
- specifying names of engine crankcase foreign oils.

1222, 1222В, 1523, 1523В

This bulletin contains information on clutch control updates due to installation of:
- hydraulic booster 2022-1602510-01 instead of hydraulic booster 80-1602510-01;
- main cylinders, manufactured by NPO Fenox Ltd, Minsk and Volchansk Automotive Plant, Volchansk, Ukraine and working cylinder, manufactured by  NPO Fenox Ltd instead of main ad working clutch cylinders, manufactured by OJSC Gidroprivod, Gomel.

92П

This service bulletin contains the following information:
- specifying names of engine crankcase main oils;
- engine crankcase double oil removal;
- specifying names of engine crankcase foreign oils.

80Х, 80Х.1, 100Х

This service bulletin contains the following information:
- specifying names of engine crankcase main oils;
- engine crankcase double oil removal;
- specifying names of engine crankcase foreign oils.

3022.2, 3022В

This service bulletin specified clutch adjustment rules due to the following changes:
- adjustment of clearances В, Н;
- thread torques;
- clutch disengagement purity check;
- scheduled maintenance operation 26 Clutch control check/adjustment.

3222, 3522

This service bulletin specified clutch adjustment rules due to the following changes:
- adjustment of clearances В, Н;
- thread torques;
- clutch disengagement purity check;
- scheduled maintenance operation 20 Clutch control check/adjustment.

2522ДВ, 2522.1, 2822ДЦ, 2822.1, 3022ДВ, 3022.1, 3022ДЦ, 3022ДЦ.1, 3522, 3522.5

This service bulletin contains amended information for service bulletin 26-2012 БЭ issued earlier.
This bulletin informs the customers about the necessity to use on the tractors with capacity from 186 till 261 HP with Deutz-engine the cooling liquid which is indicated in the operating manual for Deutz-engine instead of the cooling liquid, which is specified in service bulletin 26-2012 БЭ.

3022.2

This bulletin informs the customers about the necessity to use on the tractors BELARUS-3022.2 the cooling liquid which is indicated in the operating manual for Deutz-engine instead of the cooling liquid, which is specified in Subsection 6.8 “ Filling and lubrication of the tractor with fuel and lubrication materials”.

952.5

This operation bulletin contains information about changes in operation rules of “BELARUS-952.5” tractor regarding the order of starting and killing the engine related to changes in the structure of engine start-up lock for synchromesh gearboxes with double-lever control.

923.5

This operation bulletin contains information about changes in operation rules of “BELARUS-923.5” tractor regarding the order of starting and killing the engine related to changes in the structure of engine start-up lock for synchromesh gearboxes with double-lever control.

922.5

This operation bulletin contains information about changes in operation rules of “BELARUS-922.5” tractor regarding the order of starting and killing the engine related to changes in the structure of engine start-up lock for synchromesh gearboxes with double-lever control.

1021.5

This operation bulletin contains information about changes in operation rules of “BELARUS-1021.5” tractor regarding the order of starting and killing the engine related to changes in the structure of engine start-up lock for synchromesh gearboxes with double-lever control.

3222, 3522, 3522.5

This Bulletin provides the following information:
-information of design changes of HSC and HLL integrated oil tank for tractors BELA-RUS-3222/3522/3522.5, which can be equipped with both an oil dipstick and an oil gauge;
-Table 7.13b in Subsections 7.13.2 of 3522-0000010OM and 3522.5-0000010РЭ, Table 7.3b “Possible failures in hydraulic system for RLL and FLL control, guidelines for troubleshooting” shall be amended as follows.

3022ДЦ.1

This Bulletin provides information on additional work which is to be completed be-fore putting a new tractor into operational use.

3522

This Bulletin contains information on the construction and operation of hydraulic lift linkage EHS1, which will be mounted on tractors BELARUS-3222/3522 along with HLL EHS.

922.5

This Bulletin contains updated information on changes regarding the purposes of the engine electronic control system fuses.

900, 900.3, 920, 920.2, 920.3, 950, 950.3, 952, 952.2, 952.3

This Bulletin lists the names and brands of fuels, oils and lubricants, used for series 900 tractor operation and maintenance, as well as their quantities and replacement periodicity.

1021, 1021.3

This service bulletin contains the following information:
- specifying names of engine crankcase main oils;
- engine crankcase double oil removal;
- specifying names of engine crankcase foreign oils.

1220.1, 1220.3, 1220.4

This service bulletin contains the following information:
- specifying names of engine crankcase main oils;
- engine crankcase double oil removal;
- specifying names of engine crankcase foreign oils.

1220.1

This service bulletin contains the following information:
- specifying names of engine crankcase main oils;
- engine crankcase double oil removal;
- specifying names of substitute engine crankcase oils;
- specifying names of foreign engine crankcase oils.

1025, 1025.2, 1025.3

This service bulletin contains names and brands of fuel and lubrication materials, applied currently for operation and maintenance of BELARUS-1025/1025.2/1025.3 tractors, specifying their quantities and periodicity.

510, 512

This service bulletin contains names and brands of fuel and lubrication materials, applied currently for operation and maintenance of BELARUS-510/512 tractors, specifying their quantities and periodicity.

90, 92

This service bulletin contains names and brands of fuel and lubrication materials, applied currently for operation and maintenance of BELARUS-90/92 tractors, specifying their quantities and periodicity.

3222, 3522

This service bulletin contains BELARUS-3222/3522 maintenance plan, specifying the names of the operations and their periodicity.

3022DTS.1

This service bulletin contains BELARUS-3022DTS.1 maintenance plan, specifying the names of the operations and their periodicity.

952.5/922.5/923.5/ 1021.5/1025.5/1220.5/ 1221.5/1523.5

This operation bulletin contains supplementary information on fire safety requirements and instructions for tractor operation on peat land.

3522

The present bulletin contains information on substitution of double joint 2522-2301024-A for interchangeable reinforced double joints assembly:

• 2522-2301024-А1 produced by OAO Belkard, Grodno City
• 2522-2301024-А3 produced by ООО Ukrainskij kardan, Chernigov City

3022ДЦ.1

The present bulletin contains information on substitution of double joint 2522-2301024-A for interchangeable reinforced double joints assembly:

• 2522-2301024-А1 produced by OAO Belkard, Grodno City
• 2522-2301024-А3 produced by ООО Ukrainskij kardan, Chernigov City

3522

This operation bulletin contains data on installation of navigation equipment with a function of automated driving into “BELARUS-3522”.

2522.1/2822.1/3022.1/3022ДЦ.1

This operation bulletin contains data on installation of navigation equipment with a function of automated driving into “BELARUS-2522.1/2822.1/ 3022.1/3022ДЦ.1”.

1221.2/1221В.2

This operation bulletin contains the following information:

• Heating plugs control for BELARUS-1221.2/1221B.2 tractors equipped with engines having heating plugs.
• Replacement of plates, depicting function of cuts-out and relays, mounted into the dashboard.

2022/2022В/ 2022.3/2022В.3

In this bulletin the catalogue data about the clutch coupling 2022-1600010-А were edited according to the actual production.

1822.3/1822В.3/ 2022.3/2022В.3

This operation manual contains the following information:

• additional international symbols used on instruction plates of “BELARUS-1822.3/1822В.3/2022.3/2022В.3” tractors;
• for units lubricated in the process of maintenance service with lubricants Lithol-24 GOST 21150-87 and BECHEM LCP-GM, additional backup lubricant MC-1000 TU (technical specifications) 0254-003-45540231-99 is introduced, with the use of which units lubrication is required twice as rare.

2522В/3022В/2522ДВ/ 3022ДВ/2822ДЦ/2522.1/ 2822.1/3022.1/3022ДЦ.1

This operation manual contains the following information:

• additional international symbols used on instruction plates of “BELARUS-3022ДЦ.1” tractor and its modifications;
• information on introduction of uprated FDA drive cardan shaft on “BELARUS-3522”;
• a task on maintenance service “Lubrication of RLL position sensor threaded part” is introduced;
• for units lubricated in the process of maintenance service with lubricants Lithol-24 GOST 21150-87 and BECHEM LCP-GM, additional backup lubricant MC-1000 TU (technical specifications) 0254-003-45540231-99 is introduced, with the use of which units lubrication is required twice as rare.

1523.5

• updated information on operation and maintenance service of “BELARUS-1523.5” tractors with synchromesh gearbox;
• specified information on differences between “BELARUS-1523.5” tractors with SCR sys-tem manufactured by “BOSCH” (Germany) and “BELARUS-1523.5” tractors with SCR system manufactured by “ROSSKATavto”(Russia).

3522

• additional international symbols, which are used on information plates of BELARUS-3522 tractors;
• information on introduction of redesigned propshaft of FDA drive on BELARUS-3522 tractors and information on cancelation of Task “Cleaning and oiling of spline joints of front PTO shaft” from Maintenance services;
• new maintenance task “Lubrication of RLL position sensor threaded part” is intro-duced.
• for assembly units, which can be lubricated during maintenance with Litol-24 GOST 21150-87 and BECHEM LCP-GM greases, an additional backup lubrication MS-1000 TU 0254-003-45540231-99 is introduced. When using the latter, the as-sembly units shall be lubricated two times less.

1523/1523В/ 1523.3/1523В.3

This operation manual contains additional information on BELARUS-1523/1523B/1523.3/1523B.3 storage conditions.

920.4/952.4

The present bulletin contains amendments of catalogues regarding to steering control 1025-3400010-01 according to the actual production.

952.5

The present bulletin contains amendments of catalogues regarding to steering control 1025-3400010 according to the actual production.

923.5

The present operational bulletin contains information on changes in design and range of assembly units and parts for reduction gear unit mechanical control of BELARUS—923.5 tractor.

923.4

The present operational bulletin contains information on changes in design and range of assembly units and parts for reduction gear unit mechanical control of BELARUS—923.4 tractor.

3022ДЦ.1

This catalogue of spare parts and assembly units is amended due to introduction into production of a pressure regulator РД-3512010.

1523/1523В/ 1523.3/1523В.3

This operator's manual revises the subsection “Pilot lamps unit”.

3222/3522/3522.5

1. Data on operation of the clutch with the main cylinder C2602 and the operating cylinder P2602 manufactured by NPOOO “Phenox” and installed instead of cylinders manufactured by RUE “GZG”;
2. Data on changing the brake fluid grade, used in the clutch operation hydraulic drive group.

3022ДЦ.1

1. Data on operation of the clutch with the main cylinder C2602 and the operating cylinder P2602 manufactured by NPOOO “Phenox” and installed instead of cylinders manufactured by RUE “GZG”;
2. Data on changing the brake fluid grade, used in the clutch operation hydraulic drive group.

92П

1. Modified engine electrical equipment.
2. Modified dashboard.

322/422/622

This operation bulletin contains information on the volume of the combined oil tank for HLL and HSC of tractors “BELARUS-322/422/622” and information on permitted withdrawal of operating fluid from the combined oil tank for HLL and HSC by cylinders of coupled machine.

1822.3/1822В.3/2022.3/2022В.3

1. Additional information on operating the clutch with master and servo cylinders “Fenox», which will be installed along with currently used master and servo cylinders of RUE “GZG”.
2. Data on changing the brake fluid grade, used in the clutch operation hydraulic drive group.

3022ДЦ.1

In the present bulletin is given information on modifications in clutch control due to replacement of main and working cylinders produced by RUP GZG (Gomel City) by cylinders produced by NPOOO Fenox (Minsk City).

3522

In the present bulletin is given information on modifications in clutch control due to replacement of main and working cylinders produced by RUP GZG (Gomel City) by cylinders produced by NPOOO Fenox (Minsk City).

921/921.3

This operation bulletin contains information on control of heating plugs for “BELARUS-921/921.3” tractors, equipped with engines with heating plugs installed.

890/892

This operation bulletin contains the following updates on operation rules for “BELARUS-890/892” tractors:

1. regarding engine start-up;
2. regarding control of heating plugs for “BELARUS-892” tractors, equipped with engines with heating plugs installed.

900/900.3/920/920.2/920.3/ 950/950.3/952/952.2/952.3

This operation bulletin contains the following updates on operation rules for “BELARUS-900/900.3/920/920.2/920.3/ 950/950.3/952/952.2/952.3” tractors:

1. regarding engine start-up under normal conditions;
2. regarding engine start-up at low temperatures.

80.1/82.1/82.2/82Р

This operation bulletin contains information on control of heating plugs for “BELARUS-80.1/82.1/82.2/82Р” tractors, equipped with engines with heating plugs installed.

2022/2022.3

In the present bulletin is amended catalogue as related to gear box 2022-1700010 according to the current production.

92П

This operation bulletin contains information on control of heating plugs for “BELARUS-92П” tractors, equipped with engines with heating plugs installed.

3222/3522

This operation bulletin contains updated information on operation of tractors with twinned wheels at tillage.

2522V/2522DV/2822DZ/ 3022V/3022DV/3022DZ/3022DZ.1

This operation bulletin contains updated information on operation of tractors at tillage.

3222/3522

This operation manual contains verified data on numbering of positions in the text of clause 2.16.2.2 “Unit of electronic joysticks EJU-01” of the subsection 2.16.2 “Unit of electronic joysticks”.

1523/1523B/ 1523.3/1523B.3

Updating of load rates on single tires of the tractor with main and supplementary configuration in order to choose operation modes at various speeds and inner pressure of tires; Instructions on operation of tractor with rear wheels doubled.

892/892.2

This operation bulletin contains information on changes in technical data of diesel.

1523/1523В/ 1523.3/1523В.3

Additional information on controlling clutch with master and working cylinders "Fenox", which will be installed along with currently used master and working cylinders of RUE "GZG"; Data on changing the brake fluid grade, used in the clutch control hydraulic drive.

2022.3/2022В.3

This operation bulletin contains information on changes in clutch control due to alternative introduction of clutch master and working cylinders manufactured by "Fenox" of Minsk instead of master and working cylinders manufactured by RUE "GZG" of Gomel.

1222/1222В/ 1523/1523В

This operation bulletin contains information on changes in clutch control due to alternative introduction of clutch master and working cylinders manufactured by "Fenox" of Minsk instead of master and working cylinders manufactured by RUE "GZG" of Gomel, and due to amendments to the catalogue on clutch control.

3222/3522/3522.5

The present operator's manual contains additional data on maintenance of front wheel fender rotary mechanisms.

1220.1/1220.3/1220.4

This operation manual contains updates for rear PTO control modes of BELARUS-1220.1/1220.3/1220.4 tractor.

1221.2/1221В.2/1221.3/1221.4

This operation manual contains updates for rear PTO control modes of BELARUS-1221.2/1221В.2/1221.3/1221.4 tractor.

3222/3522/3522.5

This operation bulletin contains additional data on fire safety regulations.

2522DV/2522.1/2822DZ/2822.1/3022DV/ 3022.1/3022DZ/3022DZ.1/3522/3522.5

This operation bulletin contains designations and brands of fuel and lubrication materials (FLM) used at present during operation and maintenance of tractors with capacity range from 186 to 261 kW, with the data on their quantity and change intervals.

1523/1523В/1523.3/1523В.3

This operation bulletin contains supplementary information on fire safety requirements.

2522V/3022V/2522DV/3022DV/2822DZ/ 2522.1/2822.1/3022.1/3022DZ/3022DZ.1

This operation bulletin contains supplementary information on fire safety requirements.

1822.3/1822В.3/2022.3/2022В.3/2022.4/2022В.4

This operation bulletin contains supplementary information on fire safety requirements.

2022.5

This operation bulletin contains supplementary information on fire safety requirements.

80Х/80Х.1/100Х

This operation bulletin contains supplementary information on fire safety requirements.

92П

This operation bulletin contains information on changes in technical data of diesel.

900/900.2/900.3/920/920.2/920.3/ 950/950.2/950.3/952/952.2/952.3

This operation bulletin contains information on changes in technical data of diesel, installed on tractors of 900 series with unified cab.

92П

This operation bulletin contains supplementary information on fire safety requirements.

3022ДЦ.1

This operation bulletin contains the following information:

• data on design and scheduled maintenance of hydrostatic power steering oil tank with an oil-level gauge instead of oil gauge glass and the breather-filter with a paper filter element are changed;
• data on scheduled maintenance of the breather-filter of oil tank of lift linkage hydraulic system are changed.

550/552/570/572/ 590/592/590.2/592.2

This operation bulletin contains information on changes in technical data of diesel, mounted on tractors of 500 series with unified cab.

550/552/570/572/ 590/592/590.2/592.2

This operation bulletin contains supplementary information on fire safety requirements and safety measures during maintenance.

1221.2/1221В.2/1221.3/1221.4

This operation bulletin contains supplementary information on fire safety requirements.

826/926

This operation bulletin contains supplementary information on fire safety requirements and information about inadmissibility of tractor operation without accumulator batteries in electrical system of the tractor.

1025/1025.2/1025.3/1025.4

This operation bulletin contains supplementary information on fire safety requirements.

3522

This operation bulletin contains specified data on rear track formation of the tractor BELARUS-3522.

80/82.1/82.2/82Р

This operation bulletin contains supplementary information on fire safety requirements.

1021/1021.3/1021.4

This operation bulletin contains supplementary information on fire safety requirements, on safety measures during maintenance and information about inadmissibility of tractor operation without accumulator batteries in electrical system of the tractor.

1523.5

This operation bulletin contains differential characteristics of engine control systems (BOSCH-BESG and ROSSKATauto-EMITEC) of tractors 1523.5.

1025/1025.2/1025.3

This operation bulletin contains information on changes in technical data of diesel engines mounted into tractors BELARUS-1025 and modifications.

826/926

This operation bulletin contains information on changes in technical data of diesel engines for tractors BELARUS-826, BELARUS-926.

1220.1/1220.3/1220.4

This operation bulletin contains supplementary information on fire safety requirements.

900/900.3/920/920.2/920.3/950/ 950.3/952/952.2/952.3/920.4/952.4

This operation bulletin contains supplementary information on fire safety requirements and information about inadmissibility of tractor operation without accumulator batteries in electrical system of the tractor.

1221.2/1221В.2/1221.3/1221.4

This operation bulletin contains supplementary information about engine air cleaner maintenance.

1523/1523В/1523.3/1523В.3

This operation bulletin contains supplementary information about engine air cleaner maintenance.

3522

This operation bulletin contains information on additional operations for maintenance service intended to increase tractors “BELARUS-3522” heat resistance, as well as instructions for tractor operation on peat land.

3022ДЦ.1

This operation bulletin contains information on additional operations for maintenance service intended to increase tractors “BELARUS-3022DZ.1” heat resistance, as well as instructions for tractor operation on peat land.

926

This operator's manual specifies the features of BELARUS-926 model distinguishing it from BELARUS-826 model. All other information required for studying operation rules, service maintenance and structure of “BELARUS-926” tractor is provided in the operator's manual 826 – 0000010 OE attached to your tractor.

1523/1523В/ 1523.3/1523В.3

This service bulletin contains updated information on the rear lift linkage control of “BELARUS-1523/-1523В/-1523.3/-1523В.3” tractors when a control console ПУ-03 manufactured by the plant “Izmeritel” is installed.

2022.3/2022В.3

This service bulletin contains updated information on the rear lift linkage control of “BELARUS-1523/-1523В/-1523.3/-1523В.3” tractors when a control console ПУ-03 manufactured by the plant “Izmeritel” is installed.

1523/1523.3/1523В

Updating catalogues, attached to tractors put on production since October 1, 2010 with a gearbox 1522-1700010 (16F+8R).

310.3/310Р/320/320.3/320Р/321

The update of the with the tractors delivered catalogues as of November 25, 2010 with hydraulic systems for the mounting of the pump NSH6G-3 (“Gidrosila”, Kirovograd).

1025/1025.2/1025.3

In this operating manual the data of noise and vibration level have been entered into section “Technical specifications”.

1025/1025.2/1025.3

Incorporation of the changed hydraulic system pump control, hydraulic system circuit diagrams and hydraulic system connection diagram of external customers into OM.

1220.1/1220.3

Incorporation of the changed hydraulic system pump control, hydraulic system circuit diagrams and hydraulic system connection diagram of external customers into OM.

900/900.2/900.3/920/920.2/920.3/ 950/950.2/950.3/952/952.2/952.3

Incorporation of the changed hydraulic system pump control, hydraulic system circuit diagrams and hydraulic system connection diagram of external customers into OM.

1221/1221В/1221.2/ 1221В.2/1221.3/1221В.3

Incorporation of the changed hydraulic system pump control, hydraulic system circuit diagrams and hydraulic system connection diagram to external customers into OM.

92П

Incorporation of the changed hydraulic system pump control and hydraulic system circuit diagrams into OM.

821/821.2/821.3/921/921.2/ 921.3

Incorporation of the hydraulic system circuit diagrams and hydraulic system connection diagram to external customers into OM.

890/892

Incorporation of the changed hydraulic system pump control, hydraulic system circuit diagrams and hydraulic system connection diagram to external customers into OM.

1021/1021.3

Incorporation of hydraulic system circuit diagram into OM.

1221/1221В

The following information is given in this bulletin:

1. changed dashboard;
2. installation of front lights.

80.1/82.1/82.2/82P/550/ 552/570/572/590/592/ 590.2/592.2/890/892/892.2/ 892.3/922/922.3/922.4/923/ 923.3/923.4

In this information bulletin the names and trade marks of FLM are given which are used now during operation and maintenance of the tractors with the power from 44 to 88 kW. It is mentioned the quantity of FLM and replacement times.

2522В/3022В/2522ДВ/3022ДВ/ 2822ДЦ/2522.1/2822.1/3022.1/3022ДЦ.1

In this bulletin there are additional data about the maintenance of the electric cables of the engine room.

3222/3522

In this bulletin there are additional data about the maintenance of the electric cables of the engine room.

923

Incorporation of the hydraulic system circuit diagrams and hydraulic system connection diagram to external customers into OM.

822/922

Incorporation of the hydraulic system circuit diagrams and hydraulic system connection diagram to external customers into OM.

550/552/570/572/ 590/592/590.2/592.2

Incorporation of the changed hydraulic system pump control, hydraulic system circuit diagrams and hydraulic system connection diagram to external customers into OM.

80.1/82.1/82.2/82Р

Incorporation of the changed hydraulic system pump control, hydraulic system circuit diagrams and hydraulic system connection diagram to external customers into OM.

3222/3522

In this operation bulletin there are specifications of the duplex filter construction according to the control valve of the transmission hydraulic system and lubrication valve.

2522ДВ/2522.1/2822ДЦ/2822.1/ 3022ДВ/3022.1/3022ДЦ/3022ДЦ.1/ 3522/3522.5

Наименование ГСМ, используемые в настоящее время при эксплуатации и техническом обслуживании с указанием их количества и периодичности замены.

92П

In this bulletin there is an information about the exchange of the underwheel switch.

1025/1025.2/1025.3

In this bulletin there is the information about the changing of dashboard and underwheel switch parts.

570/572/592.2

Implementation of the modernized underwheel switch.

1221.4

Implementation of the modernized underwheel switch.

3022ДЦ.1

In this catalogue of parts and assembly units the correction is made according to the application of pan 3022-1101001 and return tube 3022ДЦ-1101010 in the fuel system.

1220.1/1220.2/1220.4

Implementation of the modernized underwheel switch.

80.1/80.3/80У/82У/ 82.1/820/82.3/2Р/82П

Application of new underwheel switch.

1021.3

Implementation of the modernized underwheel switch.

570/572/592.2

In this bulletin there are the changed data about the design and stock-list of assembly units and parts of gearbox (GB) and its control.

90/92

In this bulletin there are the changed data about the design and stock-list of assembly units and parts of gearbox (GB) and its control.

892/892.2/892.3

In this bulletin there are the changed data about the design and stock-list of assembly units and parts of gearbox (GB) and its control.

BELARUS-920.4/952.4 with motors ТСD 2012 L04 2V (63,5 kW)/ 2012 L04 2V (72 kW) и Д-245.43S3A/Д-245.5S3A

In this bulletin there are the changed data about the design and stock-list of assembly units and parts of gearbox (GB) and its control.

920.4/952.4 с двигателем ТСD 2012 L04 2V (63,5 кВт)/ 2012 L04 2V (72 кВт) и Д-245.43S3A/Д-245.5S3A

В настоящем эксплуатационном бюллетене приведены измененные сведения по конструкции и номенклатуре сборочных единиц и деталей коробки передач (КП) и управлению ею.

510/510.1/512/512.1/520/522

In this bulletin there are the changed data about the design and stock-list of assembly units and parts of gearbox (GB) and its control.

1021.3

In this bulletin there are the changed data about the design and stock-list of assembly units and parts of gearbox (GB) and its control.

826/806/926/906/626/606

In this bulletin there are the changed data about the design and stock-list of assembly units and parts of gearbox (GB) and its control.

821/821.2/821.3/921/ 921.2/921.3

In this bulletin there are the changed data about the design and stock-list of assembly units and parts of gearbox (GB) and its control.

92П

In this bulletin there are the changed data about the design and stock-list of assembly units and parts of gearbox (GB) and its control.

900/900.2/900.3/920/920.2/920.3/ 950/950.2/950.3/952/952.2/952.3

In this bulletin there are the changed data about the design and stock-list of assembly units and parts of gearbox (GB) and its control.

510/510.1/512/512.2

Error correction.

3222/3522

In this bulletin there are distinguishing features of the tractor’s operation with the fuel tank 3522 – 1101510 with the increased fuel volume.

510/512

The present information bulletin contains changed data about HLL pump control on tractors BELARUS 510/512.

90/92

The present information bulletin contains changed data about HLL pump control on tractors BELARUS 90/92.

826/806/926/906/626/606

In this bulletin there is an information about the exchange of the underwheel switch according to the application of the three-spoke steering wheel and the list of the parts with the information about the interchangeable components.

892/892.2/892.3

In this bulletin there is an information about the exchange of the underwheel switch according to the application of the three-spoke steering wheel and the list of the parts with the information about the interchangeable components.

2822ДЦ/2522.1/2822.1/3022ДЦ.1

This service bulletin contains additional information on maintenance of fuel tanks.

2522В/3022В/2522ДВ/3022ДВ/2822ДЦ/ 2522.1/2822.1/3022.1/3022ДЦ.1

This operation bulletin contains additional information on fire safety requirements.

3022ДЦ.1

This service bulletin contains data on structural changes of the hydraulic lift linkage of tractors “BELARUS 3022ДЦ.1” related to replacement of hoses of front lift linkage with pipes and replacement of oil tank breather of “Sofima” company for a breather ФС-01.

3222/3522

This service bulletin contains data on structural changes of the hydraulic lift linkage of tractors “BELARUS 3222/3522” related to installation of a pump А10СN063/52R instead of the pump А10СN045, changing of the pump drive structure and of the routes of the pump hydraulic fittings.

2522ДВ/2822ДЦ/3022ДВ/ 2522.1/2822.1/3022.1

This information bulletin changes designations of the friction and the break of the rear PTO (п/гр 4202), supplied as spare parts.

3222/3522/3522.5

This operation bulletin contains additional information on control of brakes with master cylinders for forward travel “FENOX” which will be installed along with currently used master brake cylinders for forward travel “CARLISLE”.

2822ДЦ

This operation bulletin contains additional information on control of brakes with master cylinders for forward travel “FENOX” which will be installed along with currently used master brake cylinders for forward travel “CARLISLE”.

3022ДЦ.1

This operation bulletin contains additional information on control of brakes with master cylinders for forward travel “FENOX” which will be installed along with currently used master brake cylinders for forward travel “CARLISLE”.

3522

This operation bulletin contains additional information on control of brakes with master cylinders for forward travel “FENOX” which will be installed along with currently used master brake cylinders for forward travel “CARLISLE”.

1822.3/1822В.3/2022.3/2022В.3/2022.5

This operation bulletin contains specifications on the rear PTO control.

1221.2/1221B.2/1221.3

This operation bulletin contains the following changes:

• on the procedure of programming the integrated indicator;
• on installation and adjustment of speed sensors.

1221/1221B/1221.2/1221B.2/1221.3/1221B.3

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

92П

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

1220.1

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

890/892

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

550/552/570/572/590/592/590.2/592.2

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

80.1/82.1/82.2/82P

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

1022.4

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

923.4

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

925.4

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

1021/1021.3

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

923

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

80X/80X.1/100X

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

900/900.2/900.3/920/920.2/920.3/ 950/950.2/950.3/952/952.2/952.3

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

1025/1025.2/1025.3

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

812/822/912/922

This operation bulletin contains amended data on running of tractors completed with a valve group РП70 with fixation of one valve in «Uplift» position.

2022/2022B/2022.3/ 2022В.3/2022.4

Verification of tractor operating parameters

1523/1523В/ 1523.3/1523В.3

In the present information bulletin the updated information on operating tractors BELARUS —1523/1523B/1523.3/1523B.3 in a set with electrohydraulic module РП70-1523 is provided

2022/2022В

In the present information bulletin the updated information on operating tractors BELARUS-2022/2022B in a set with electrohydraulic module РП70-1523 is provided

2522В/2522ДВ/2522.1/2822ДЦ/2822.1/ 3022В/ 3022ДВ/3022ДЦ/3022ДЦ.1/3022.1

In the present information bulletin changes of grade and quantity of oil filled in tractor transmission by operation and maintenance are provided

2022.3/2022В.3

The present operational bulletin contains information on changes in dashboard with included control instruments, switches, fuses.

550/552/570/572/590/592/590.2/592.2

The present information bulletin contains modified data on operation tractors completed with a distributor RP70 with fixation of one valve in the position “Uplift”

80X

The present information bulletin contains modified data on operation tractors completed with a distributor RP70 with fixation of one valve in the position “Uplift”

80.1/82.1/82.2/82Р

The present information bulletin contains modified data on operation tractors completed with a distributor RP70 with fixation of one valve in the position “Uplift”.

92П

The present information bulletin contains modified data on operation tractors completed with a distributor RP70 with fixation of one valve in the position “Uplift”.

890/892

The present information bulletin contains modified data on operation tractors completed with a distributor RP70 with fixation of one valve in the position “Uplift”.

922/922.3

The present information bulletin contains modified data on operation tractors completed with a distributor RP70 with fixation of one valve in the position “Uplift”.

900/900.2/900.3/920/920.2/ 920.3/920.4/950/950.2/950.3/ 952/952.2/952.3/952.4

The present information bulletin contains modified data on operation tractors completed with a distributor RP70 with fixation of one valve in the position “Uplift”.

923

The present information bulletin contains modified data on operation tractors completed with a distributor RP70 with fixation of one valve in the position “Uplift”.

1021/1021.3/1021.4

The present information bulletin contains modified data on operation tractors completed with a distributor RP70 with fixation of one valve in the position “Uplift”.

1025/1025.2/1025.3/1025.4

The present information bulletin contains modified data on operation tractors completed with a distributor RP70 with fixation of one valve in the position “Uplift”.

1220.1/1220.3/1220.4

The present information bulletin contains modified data on operation tractors completed with a distributor RP70 with fixation of one valve in the position “Uplift”.

1221/1221В/1221.2/1221B.2/ 1221.3/1221B.3/1221.4

The present information bulletin contains modified data on operation tractors completed with a distributor RP70 with fixation of one valve in the position “Uplift”.

2022/2022.3

The present catalogue of assembly parts and units is amended in connection with introduction of facing 2025-8400005 and its use on tractors 2022/2022.3 produced in 2011 as an alternative.

2522ДВ/3022ДВ/2822ДЦ/2522.1/ 2822.1/3022.1/3022ДЦ.1

The present operation bulletin contains additional data on maintenance of a position sen-sor R917005165 in a front lift linkage.

510/510.1/512/512.2/520/522

Updating the catalogue with account for availability of a draft control unit with bracket 80П-4614210-А and its control 70-4616010-В in the hydraulic lift linkage.

90/92

Updating the catalogue with account for availability of a draft control unit with bracket 80П-4614210-А and its control 70-4616010-В in the hydraulic lift linkage.

1222/1222B/1523/1523B

Adjustment of the catalogue in connection with modification of the structure of gearbox control mechanism for tractors “BELARUS-1222/1523”

1523.4

Adjustment of the catalogue in connection with modification of the structure of gearbox control mechanism for tractors “BELARUS-1523.4”

3022ДЦ.1

The present operator's manual contains additional data on maintenance of pins of hydrau-lic cylinders 2522-4605235 of rear lift linkage.

3522

The present operator's manual contains additional data on maintenance of pins of hydrau-lic cylinders 2522-4605235 of rear lift linkage.

3522

This service bulletin contains updating of “BELARUS-3522” tractor operational rules.

3522

This service bulletin contains updated changes for steering column tilt angle on the reverse of “BELARUS-3522” tractor.

3022.1/3022ДЦ.1

This service bulletin contains updating of “BELARUS-3022.1/3022DZ.1” tractor operational rules.

2522ДВ/3022ДВ/2822ДЦ/ 2522.1/2822.1/3022.1/3022ДЦ.1

This service bulletin contains updates on tractor washing and cleaning cab interior.

3222/3522

This service bulletin contains additional data on rules of coupling agricultural machines to the rear lift linkage.

80Х, 80.1, 82.1, 82.2, 82P 90, 92, 510, 550, 552, 570, 572, 590, 592,590.2, 592.2, 826, 890, 892, 900, 900.3, 920, 920.2, 920.3, 950, 950.3, 952, 952.2, 952.3, 922, 923

Operator's manual

821, 821.2, 821.3, 921, 921.2 921.3

Operator's manual

2022/2022В

Operator's manual

1025, 1025.2, 1025.3, 1021

Operator's manual

310/320/321/320P

Specifying tractor operational parameters

90, 92

Refinement of technical characteristics of diesel engine

2022/2022В/2022.3/2022В.3

Updating manual of air cleaner maintenance

900/900.2/900.3/920/920.2/ 920.3/950/950.2/950.3 /952/952.2/952.3

Operator's manual

1025/1025.2/1025.3

Parts and assembly units catalogue

1025.4

Parts and assembly units catalogue

821/821.2/821.3/921/921.2/921.3

Modification of dashboard electrical equipment

2522ДВ/3022ДВ/2822ДЦ/2522.1/2822.1/ 3022.1/3022ДЦ.1/1523/1523В/1523.2/ 1523В.2/1523.3/1523.4/1523В.4/2022/ 2022В/2022.3/2022В.3/ 2022.4/2022В.4

Operator's manual

900/952/1025.3

Trailer brake hydraulic drive

1025 and modifications

Gearbox (GB) modifications with reducing gear llation possibility

1025/1025.3/82.2/892.2/ 920.2/920.3/922/922.3/ 923/923.3/952.2/952.3

Parts and assembly units catalogue

1025/1025.3/82.1/892.2/ 920.2/920.3/922/922.3/ 923/923.3/952.2/952.3/ 1221/1221.3/1221В/1222/ 1222.3/1222В/925/925.3/1523/ 1523.3

Parts and assembly units catalogue

2522ДВ/3022ДВ/2822ДЦ

Installation of oil temperature emergency level sensor for hydraulic lift linkage

1000/1200 series

Modernization back PTO

1200 series

Modernization back PTO

1200 series

Modernization back PTO

1000 series

Modernization back PTO

1000 series

Modernization back PTO

1025/1025.3/920.2/592.2/82.1/ 82.2/892.2/920.3/922/922.3/923/ 923.3/923.4 (925М)/ 923.5 (925.3М)/952.2/952.3/ 1021.3/1022.3/1021Т

Performing the adjusting of front wheel fenders with pivot mechanism

1200 series

Modernization back PTO

1025/1221/1523

Operating instruction for reducing gear 1025-1706020

2500 series

Modernization

1221/1221В/1221.2/1221В.2

Installation of modernized gear assembly

500/800/900

Order of book for after-sales service of tractors “BELARUS” 500, 800, 900 series

300/500/900/1000/1200/1500/2000

Hygiene requirements

900/1000/1200/1500/2000/2500

Requirement introduction for cleaning of crankcase ventilation valves of front driving axle

2000 series

Changing of the cooling liquid lever checking procedure

2000 series

Operating manual correction Servicing of FPG10-0318 air cleaner of “2000” series tractor

2522ДВ/3022ДВ

Replacement of the priority valve with the reverse cock

1025.2/1025.3/1221.3

Installation of fuel tank made of polymer materials 1221-1101500

920/952/920.3/952.3/82П

Installation of fuel tank made of polymer materials 1221-1101500

1221.2/1221В.2

Installation of fuel tank made of polymer materials 1221-1101500.

821/921.3/1021.3/1221.3

Replacement of friction lining 85-4202057 of PTO band 85-4202100 by friction lining 85-4202056-A6-01

320/320Р/321

Replacement of splint pin 2х12.019 GOST 397-79 by splint pin 1.6x12.019 GOST 397-79